EN
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
lights up.
A.
1.
Replace the air filter (see page
13).
2.
Turn on the air purifier.
3.
Press and hold
4.
will turn off when successfully
reset.
The filter was changed before
B.
lit up.
3.
Press and hold
This will turn on
4.
Press and hold
seconds.
will turn off when successfully
5.
reset.
12
01.01_EML_Vital100-RXW_TrueHEPAAirPurifier.indd 12
01.01_EML_Vital100-RXW_TrueHEPAAirPurifier.indd 12
Cleaning the Filter
The Pre-Filter should be cleaned once a
month to increase the efficiency and extend
the life of your filter.
1.
for 3 seconds.
2.
3.
for 3 seconds.
.
4.
again for 3
True HEPA
& Activated
Remove the filter from the housing and
peel the Pre-Filter away from the True
HEPA and Activated Carbon Filters.
[Figure
2.1]
Clean both sides of the Pre-Filter using
a soft brush or vacuum hose to remove
hair, dust, and large particles.
Gently wash the Pre-Filter under running
water. Dry completely before placing it
back on the velcro tape.
Replace filter in housing.
Note: Do not clean the True HEPA and
Activated Carbon Filters.
When to
Filter
Clean
Every 2–4
Pre-Filter
weeks
Do not
Carbon
clean
Filter
Figure 2.1
When to
Replace
6–8 months
2/26/20 5:18 PM
2/26/20 5:18 PM