Battery Fully Charged; Battery Low; Charging With The Adapter - Philips HQ7895 Manual Del Usuario

EnglisH
8
charging
Make sure the shaver is switched off before you charge it.
Charging takes approx. 1 hour.
You can also shave without charging by connecting the shaver to the mains.
A fully charged shaver has a cordless shaving time of up to 55 minutes.
1 Charge the shaver when the bottom light flashes orange.
charge indications
charging
- When you start charging the empty shaver, the bottom light flashes
orange. When the battery contains enough power for one shave, the
middle charging light starts flashing green (Fig. 6).

Battery fully charged

- When the battery is fully charged, the top charging light lights up
green continuously.

Battery low

- When the battery is almost empty i.e. when there are only 5 or less
shaving minutes left, the bottom charging light starts to flash orange.
When you switch off the shaver, this light still flashes orange a few times.

charging with the adapter

1 Put the appliance plug in the shaver (Fig. 7).
2 Put the adapter in the wall socket.
3 Remove the adapter from the wall socket and pull the appliance
plug out of the shaver when the battery is fully charged.
charging in the Jet clean system
1 Place the shaver in the holder and completely push down the lever
to lock the shaver into place (Fig. 8).
The charging light on the Jet Clean system flashes to indicate that
,
the shaver is charging.
When the charging light lights up continuously (after approx. 1
,
hour), the shaver is fully charged (Fig. 9).