Eaton Metalux RBSURF6 Instrucciones De Instalación página 4

Installation Instructions – 2RBSURF6 and 4RBSURF6
B3. Attach box to wall using appropriate hardware
(not included) to secure both short rails and the
bottom long rail to the surface. Ensure the box
remains square when mounting. The spacing of
the mounting slots is 16 inches center-to-center.
(Figure 11.)
B4. Unscrew and remove the top long rail, as well as
the L- brackets, and retain for reuse. (Figure 12)
Figure 12.
B5. Follow steps A7 – A9 above to complete the
installation of the fixture.
C. Instructions for Suspending Surface Mount Box
using Suspension Kit (sold separately)
C1. Insert L- brackets into the slot on each side of one
of the long rails. (Figure 13.)
Figure 13.
C2. Join the long rail with the short rails by inserting
the protruding leg of each L- brackets into the
corresponding slot on the long rail. Use 2 of the
included screws to secure the short rails to the
long rail. (Figure 14.)
N ote: Screws may strip if over torqued.
4
EATON IB519115EN Installation instructions
Figure 14.
C3. Slide the fixture completely into the channel
through the open side. (Figure 15.)
Figure 15.
C4. Install the remaining long rail, L- brackets and
screws. (Figure 16.)
N ote: Screws may strip if over torqued.
Figure 16.
C5. Follow instructions included with suspension kit to
complete installation of the fixture.