Polk SurroundBar 5000 Manual Del Propietário página 8

LUETOOTH WIRELESS TECHNOLOGY
®
To use your luetooth wireless technology device
with the SurroundBar 5000, you must first pair your
device with your SurroundBar.
Pairing creates the ability of your luetooth device to connect
with your SurroundBar wirelessly. Pairing is like a handshake
between your luetooth device and your SurroundBar 5000
in which they meet and exchange information.
You only have to pair your SurroundBar with your luetooth
device one time for this exchange of information to take place.
After that you simply select the "polk sb5000" from your
device list to make the connection to your SurroundBar.
The SurroundBar can hold 8 luetooth devices in its memory.
If enough devices pair after yours, your device could
be dropped from the memory list.
Pair and connect your Bluetooth device
with the SurroundBar:
1. Make sure your luetooth device and SurroundBar 5000
are both powered on.
2. Activate the luetooth function on your luetooth source
device. See your device's manual for instructions.
3. Press the luetooth source button from the SurroundBar
remote or press the SOURCE button on the SurroundBar
until the luetooth source is selected.
LEARN SOURCE
The luetooth symbol will illuminate, then begin slowly
pulsing as it looks for the paired device.
4. Your SurroundBar will now be displayed on your source
device and available to pair and/or connect. Select the
"polk sb5000" on your device to initiate
the connection process.
5. After a short delay (5 seconds), the two devices should
now be connected. You should hear a short tone and
the luetooth source symbol will now be steady blue.
6. Play your music from your device!
Note: If your device asks for a passcode to pair to the
SurroundBar, enter "0000."
8 Polk udio Customer Service 800-377-7655 (Outside US & Canada: 410-358-3600)
OR
How to disconnect with a luetooth device:
1. Press and release the Remote Control luetooth button, or
2. Press and release the luetooth Source button, or
3. Turn off or disconnect the luetooth feature
on your luetooth device.
The SurroundBar will emit a short tone and the
luetooth source symbol will begin slowly pulsing
when disconnected.
Automatic connection:
Any time you want to connect the last paired device
and play it through the SurroundBar, do the following:
1. Turn your device's luetooth function on.
2. Enter luetooth source by pressing the luetooth source
button from the remote or press the SOURCE button
on the SurroundBar until the luetooth source is selected.
3. After a short delay, the two devices will automatically
connect, you will hear a short tone, and the luetooth
source symbol will now be steady blue.
Note: By default, the last connected luetooth device
will automatically connect if available.
Pair and/or connect to a device when in luetooth
source, but disconnected:
1. Engage the luetooth function on your luetooth source
device. See your device's manual for instructions.
a. The SurroundBar will be displayed on your source
device as available to pair and connect. Select
the "polk sb5000" on your device to initiate
the pairing and connection process.
After a short delay, the two devices should now be paired
and connected. You should hear a short tone and the
luetooth source symbol will now be steady blue.
How to disconnect:
Note: Anytime The SurroundBar exits SLEEP mode and is in
luetooth source, the SurroundBar will automatically connect
to the last paired luetooth device if the paired device's
luetooth feature is on.