4 Maintenance
Maintenance must be carried out by competent personnel.
We recommend a regular visual check at least annually. Signs of wear that may affect function
should be reported to their service provider (e.g. significant wear or excessive discoloration from
long term exposure to UV).
Any changes in performance of this device must be reported to the practitioner.
Changes in performance may include:
• Increase in ankle stiffness
• Reduced ankle support (free movement)
• Any unusual noise
• Lack of vacuum
Note: Check that the suspension sleeve maintains a good seal with the skin proximally and
socket distally.
The practitioner must also be informed of:
• Any changes in body weight and/or activity level.
• Discoloration of the residual limb.
• Significant wear or excessive discoloration from long term exposure to UV.
Cleaning
Use a damp cloth and mild soap to clean outside surfaces. Do not use aggressive cleansers.
5 Limitations on Use
Intended life:
A local risk assessment should be carried out based upon activity and usage.
Lifting loads:
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment:
Avoid exposing the device to corrosive elements such
as water, acids and other liquids. Also avoid abrasive
environments such as those containing sand for example, as
these may promote premature wear.
Exclusively for use between -15˚C and 50˚C (5˚F to 122˚F).
6
938369SPK1/1-0121