DOREL Living TWIN BUNK BED Manual Del Usuario página 10

TWIN BUNK BED
DA8378
STEP 4
Insert slats (O) into the remaining holes of the side rails (G and H) & (I and J) of the bunks.
Secure slats (O) to the side rails (G and H) & (I and J) with flat head wood screws (4) using a Phillips
head screwdriver (not included).
NOTE: Slats (O) and (N) should be placed between two wooden blocks.
NOTE: If you notice that any of the slats (O) are not perfectly flat, be sure to assemble in such a way that
the slat (O) curves up in the middle and down on the ends.