ION Wave Rider Guia De Inicio Rapido página 7

Stereo-Link™: Linking Two Speakers Together Wirelessly
1. Power on both Wave Rider speakers.
Note: In order to use Stereo-Link Mode, you cannot have a Bluetooth device connected.
If one speaker is connected to a Bluetooth device, break the connection by pressing and
holding the Bluetooth button.
2. With no Bluetooth device connected (blue LEDs on both speakers will blink), on one
Wave Rider press and hold – and + until you hear a short 3-tone melody; repeat this for
the second Wave Rider. The melody will indicate the Wave Riders are searching for each
other to link as their blue LEDs begin to blink fast.
3. Wait about 10-30 seconds for the Wave Riders to find each other. Once "linked", one
Wave Rider will say "Paired" (if the voice prompts are enabled). Now that the two
speakers are "linked," one speaker's blue LED will be solid, while the other speaker's
blue LED will blink slowly to indicate it's ready to pair the stereo-linked speakers to your
Bluetooth device (e.g., your phone).
4. When the Wave Riders are wirelessly linked to play in stereo, navigate to your Bluetooth
device's setup screen, find Wave Rider and connect.
5. Once your smartphone is paired, you will hear "Paired" (if the voice prompts are enabled)
and audio can now play out of both speakers in stereo.
•
In Stereo-Link Mode: UI Controls on both speakers will be active.
•
To exit Stereo-Link Mode, press and hold – and + until the speaker goes back into
pairing mode, saying "Ready to Pair".
•
In Stereo-Link Mode, press Power to turn off both speakers.
Note: If a Wave Rider is in Stereo-Link Mode when you power it off, it will be in Stereo-Link
the next time you power it on. That means if two Wave Riders are linked when you power them
off, they will automatically link when you power them on as long as they are in close range of
each other and powered on within 15 seconds of each other.
Note: If a Wave Rider is in Stereo-Link Mode when you power it off, when you power it back
on, it will revert back to single mode, and be ready to pair to a Bluetooth device if it does not
find another Wave Rider to link to within 15 seconds. To re-enter Stereo-Link Mode, follow
Steps 1–5 above.
7