Operation And Key Functions - Klarstein Skypillar Manual Del Usuario

EN
16
Use of the ice container
The water is cooled by the ice container. Heat from the water is absorbed and the water
temperature in the water tank is cooled below room temperature, so the air emitted by
the unit is much cooler.
a) Fill the ice container with water (do not make it completely full) and place it in the
cooling compartment. Make sure that the water in the ice container is completely
frozen.
b) Open the top cover and place the ice cream container in the water tank.
c) Two ice containers are included in the delivery. Use them alternately.
Note: The water level must not exceed the maximum mark. Never eat the ice cream
from the ice cream container.

OPERATION AND KEY FUNCTIONS

First, plug the power plug into the power outlet. The device can be used via remote
control or via the control panel.
Switch on/off: Press this button to turn on the machine. The machine then runs
at medium speed. Press this button again to put the machine into standby
mode.
Speed Adjustment: Press this button repeatedly to light the icon. The speed
levels change in the following order: medium - fast - slow - medium etc.
Mode adjustment: The factory-set mode is the normal mode. If you press this
button repeatedly, you can select one of these modes in the following order:
normal mode, natural mode, sleep mode.
Oscillating key: When you press this key, the vertical fan blades oscillate from
left to right. The corresponding symbol lights up. Press the key again to cancel
the function. Adjust the horizontal fan blades up or down by hand.