Troubleshooting - MADER APW-VAS-150P Manual Del Usuario

FAULT PROBABLE CAUSE
When Plug is not well connected
switched or electric socket is faulty.
on the The main voltage is
machine insufficient, lower than
will not minimum requirement.
start The pump is stuck.
working Thermal safety switch has
tripped.
Fluctuating Pump sucking air.
Pressure Valves dirty, worn out or
stuck.
Pump seals worn out.
Water Seals worn out.
leaking
from the
pump
The motor Thermal safety switch has
stops tripped due to
suddenly overheating.
TROUBLE SHOOTING
47
REPAIR
Check plug, socket.
Check that the main
voltage is adequate.
Refer to after storage
instructions.
Switch off the unit and let
the motor cool for a few
minutes.
Leave the lance open.
Check that hoses and
connections are airtight.
Clean and replace, or refer
to dealer.
Check and replace, or refer
to dealer.
Check that the main
voltage corresponds to
specifications.
Switch off the unit and let
it cool for a few minutes.