Gardner Bender WIC-100 Manual De Instruccion página 4

NOTE: This screen can also be displayed if a Wifi signal interruption occurs. In this case, exit the application
and re-check Wifi connection to tool.
Installation of Android App
™
To install the gardner Bender Wifi Camera software on your Android device you will need to do the following:
™
1. Open the Google Play Store application on your device and search for "gardnerbender."
™
2. Select the Gardner Bender Wifi Tool app.
3. Press INSTALL. The software should begin to download to your device.
4. After the installation is complete, the Wifi Tool icon will appear on your home screen.
Wifi Connection- Android
™
1. Open the Settings folder on your device and select the Wifi category.
2. Select WIFICAMERA from the list of available wifi networks.
3. Connect to the WIFICAMERA network using the default password 88888888.
NOTE: If the connection between the device and camera is lost, turn the camera off and then back on to
reset the connection. Repeat Wifi Connection process.
If the device and camera successfully connect, when you open the Wifi Tool app, the image seen by the
camera should be displayed on your device. If there is a problem with the Wifi connection, the screen will
look like the screen below:
NOTE: This screen can also be displayed if a wifi signal interruption occurs. In this case, exit the application
and re-check wifi connection with tool.
When the device successfully connects with the camera a home screen with the image being seen by the
camera will be displayed on your device.
www.gardnerbender.com | N85 W12545 Westbrook Crossing | 800.624.4320 | tech.support@gardnerbender.com