NESTOR MARTIN MQ33 Intrucciones De Uso página 29

USING WOOD> LIGHTING MANUALY
Set the UPPER AIR SUPPLY to maximum
•
Set the LOWER AIR SUPPLY to maximum
•
Tip: leave the door slightly open to stoke the fi re.
It will increase the draw and allow an ember bed to be achieved.
On the grate, place some paper or shavings, kindling and some small logs.
•
Light the paper
•
When the fi re has started, close off the lower air supply. Normally, it must
•
remain in the closed position when burning wood.
Important: in the event of a weak draw and/or an insuffi cient ember bed, it is
advised to leave the lower air supply open slightly in order to allow your
appliance to reach its normal performance (sometimes this can take more
than an hour).
Then, adjust the fl ow to the desired intensity with the upper air control. With
•
practice, you will quickly be able to fi nd the position that suits you best.
USING WOOD>LIGHTING WITH THE REMOTE CONTROL
Set the UPPER AIR SUPPLY to maximum by pressing the + button on the
•
remote control.
Set the LOWER AIR SUPPLY to maximum
•
. Tip: leave the door slightly open to stoke the fi re.
It will increase the draw and allow an ember bed to be achieved.
On the grate, place some paper or shavings, kindling and some small logs.
•
Light the paper..
•
When the fi re has started, close off the lower air supply. Normally, it must
•
remain in the closed position when burning wood.
Important: in the event of a weak draw and/or an insuffi cient ember bed, it is
advised to leave the lower air supply open slightly in order to allow your
appliance to reach its normal performance (sometimes this can take more
than an hour).
Then, adjust the fl ow to the desired intensity with the upper air control. With
•
practice, you will quickly be able to fi nd the position that suits you best.
79