Klarstein SKYFALL SMART Manual Del Usuario página 29

Screws ST4.8
Start point
4
Pull the power cable
through the hole in the
bracket and fix the bracket
with four screws ST4.8.
5
Measure the length of the wire
ropes (L) and refer to the dimension
given under „Installation diagram":
L = X-Y-30 (mm). Mark a line on the
wire ropes.
Note: The cooker hood should
be installed at a height of 65-
80 cm (gas) or 60-80 cm (electric
cooker) above the starting point
of the hob.
EN
29