Technical Specification - Presto E-DRY Guia De Instalacion

The dryer is supplied with a power cord. The power cord entry
position is in the rear, right side bottom of dryer. The length of
the power cord is 1M. The power cord can reach to the right side
within the distance of 55cm and reach to the left side within the
distance of 45cm. Alternatively the unit may be hard wired to a
terminal block through a rear panel Knock Out.

Technical Specification

Item
Operating voltage
Air discharge speed
Thermal protection of the motor
Heating element
Heater Thermal Protection
Operation of the circuit
Sensor range
Safety time delay
Comfort time delay
Performance
220-240 VAC, 50/60 Hz, 6.1-6.7 A, 1.34-1.6 kW
75-95 m/s
Auto Resetting Thermostat turns unit off
ON/ OFF switch available. Power 450-900W depending on air
speed
Auto Resetting Thermostat turns unit off at 85 °C Thermal cut-
off at 142 °C
Automatic infrared, self-adjusting
150 ± 20
Automatic shut-off after continuous use: 60s
Automatic shut-off after the hands are removed: 2s
57.5
Ø22
12