g Operating Instruction
g Operating Instruction
DVB-T Indoor Antenna, active
This active indoor aerial amplifi es the received signals to achieve the best possible reception.
The amplifi er output is variable up to a maximum of 36/30 dB.
Please observe the following points when installing the indoor aerial:
• Connect the aerial to a power socket and the television.
• Switch on the aerial and then turn the rotary control clockwise to align the aerial.
The dipole in front of the refl ector can be turned by 90° to match horizontal or vertical
polarisation in the UHF range.
Also align the telescopic aerials (VHF/FM).
• Use the rotary control to adapt the amplifi er output to the given transmitter.
The external aerial signal is input only when the internal aerial is switched off.
The aerial can also be powered by 12 V DC should this be necessary.
• Switch off the aerial if it is not required.
Technial data:
• Continuously variable amplifi cation aerial
• Amplifi cation: UHF max. 36/30 dB
VHF max. 36/30 dB
• Frequency range: 30–950 MHz
• 75 Ω (coaxial socket)
Safety instructions:
• Protect the antenna from dirt, moisture and overheating.
• Never use or open defective chargers.
• Repair work may only be carried out by an authorized specialist.
• Warning! Keep this device, as with all electrical devices, out of the reach of children.
• 12 V DC input (ideally for Camping)
• Mains connection: 230 V/50 Hz, 3,5 W
• With mains cable and antenna cable
• CE-approved
3