English; Important; Preparing For Use - Philips QC5002/00 Manual De Instrucciones

4203 000 33681
6

ENGLISH

Important

Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
If the cord or adapter is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this will cause a hazardous
situation.
The adapter transforms 220-240 volts to a safe voltage lower
than 24 volts.
Keep the appliance and the adapter dry.
Keep the appliance out of the reach of children.
Store and use the appliance at a temperature between 5cC and
35cC.
Do not use the appliance if the cutting unit or comb attachment
is damaged or broken, as this may cause injury.
This appliance is only intended for clipping human scalp hair. Do
not use it for any other purpose.

Preparing for use

Clipping with comb attachment:
1 Slide the arms of the comb attachment into the guiding grooves
of the appliance.
2 Press the adjustment button on the back of the appliance and
slide the comb attachment to the desired position (see table).
3 Release the adjustment button to lock the comb.
4 Insert the mains plug into the wall socket.
5 Switch the appliance on.
02-02-2006 13:42 Pagina 6