English - IKEA BEKANT Manual De Instrucciones

English

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Advice and instructions for BEKANT sit/stand
desk.
Sound level: lower than 55 dB(A)
Height setting interval:
EU-version: 64-125 cm
NA-version: 57,4-122,4
Maximum load: 70 kg
Temperature interval at usage: +5 up to +40
degrees C
Temperature interval at storage: -10 up to +50
degrees C
Humidity: 20% up to 80% at +30 degrees C.
Power supply unit: DC 34V, 200W
Manufacturer: ROL ERGO
Model: EA11022-340 or EA11022-350
This appliance shall only be used together with the
included power supply unit.
Every person who is responsible for this table at
installation or employment of the table in daily use
or in service and repair work should carefully read
these instructions. Keep these instructions close to
your sit/stand table.
Installation instructions
• The table is assembled according to separate
assembly instructions.
• Connect the cable from one leg to the other.
Connect the hand control to one of the leg and
the power-supply to the other leg. The cables to
the legs, hand control and power supply should
be placed in the accompanying net. Place
the electrical cables so that they do not get
damaged, see assembly instruction.
• Connect the electrical cable to a wall socket.
NB! The electrical cable must have full mobility.
3
• Insert the safety key in the socket on the hand
control.
• The table is now ready for use. The motors stop
automatically when the table reaches its lowest
and highest position respectively.
Usage of the table
• The table shall only be used as a working table
with the possibility to continuously adjust
working height between sitting and standing
position. The table shall only be used indoors
and in dry premises (office environment or
similar).
• The table must not be overloaded - maximum
load is 70 kg/154 lbs. The motors may be
run continuously for maximum 1 minutes.
Afterward, the motors must stand by for
approx. 9 minutes before they can be used
again.
Follow these instructions when adjusting table
height:
1. Insert the safety key in the socket on the hand
control.
2. Make sure no objects are in the way of the table
adjusting height freely.
3. In order to run the table up/down, press the
manoeuvre button with an arrow pointing up
and down respectively.
Safety regulations
• When the table is run up/down, keep the
necessary safety distance to avoid the risk to
get squeezed between the moving table top
and fixed objects in the surrounding area.
• When the table is run up/down the user shall
keep watch so that nobody is injured or no
object is damaged. The table top must not
bump into a fixed object so that the table is
overturned. Always remove any office chair
before the table is run up/down.