Hardware Installation - IOGear GW4K30GH60KIT Guia De Inicio Rapido

Hardware Installation

Transmitter
STEP 1. Connect the HDMI cable to your video source (such as laptop,
projector or Bluray player) HDMI output port.
STEP 2. Connect the other side of your cable to the HDMI input port on
your GW4K30GH60KIT transmitter.
STEP 3. Use the included power adapters, plug the power supply cable
into the power inlet port of your transmitter and the transmitter
should now be powered up.
8
Hardware Installation
Receiver
STEP 4. Connect the HDMI cable to your TV vacant HDMI port.
STEP 5. Connect the other side of your cable to the HDMI output port on
your GW4K30GH60KIT receiver.
STEP 6. Using the included power adapter, plug the power supply cable into
the power inlet port of your receiver and the receiver should now be
powered up.
STEP 7. Do the same to the second receiver as in step 6.
STEP 8. Wireless connection indicator of the transmitter and receiver will light
up when the transmitter and receiver is established wirelessly. If your
video source and your display is on, you should be able to see the
content of the source on your display.
6
5
4
9