Descargar Imprimir esta página

Preparation For Use; Handling; Error Messages; Technical Data - ADE Molly Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 5
Thank you for your decision to purchase this high quality product of ADE Germany. You
bought a scale featuring highest technical standard and well-proven quality. Please read
this instruction manual prior to the start up and keep it careful to have this information on
hand whenever needed.
1.

Preparation for use

Activate / Replace batteries:
Open the battery cover at the bottom side of the scale and
remove the battery safety strip. Please ensure the correct
polarity of the battery (+/-).
To replace battery open the battery cover, move the battery at the recess downwards
and the battery will be easy to take out. Make sure that you do not bend the contact.
Insert the new battery and close the battery cover.
Safety guideline s:
Please care that no heavy object may fall on the scale.
Otherwise, the scale may become damage.
Clean the scale only by using a slightly damp cloth. Do not use
solvents or abrasive cleaning agents. Do not submerge the
scale under water. All plastic parts of the scale should been
cleaned immediately after contact with fat, spices, vinegar and
other heavily spiced or coloured food. Avoid contact with citric
acid.

2. Handling

Switch-on the sca le:
The scales are activated by means of a vibration switch. Press down hard on the scales'
surface and the scales switch on automatically. The display starts up and "0 g" / "0.0 oz"
/ "0 ml" or "0.0 fl.oz." is shown, depending on the setting. The scales are now ready for
use.
2
Units of weight:
By touching the UNIT-panel it is possible to change the unit of weight for country specific
setting (g = gram / oz = ounce / ml = millilitre / fl.oz. = fluid ounce). Please pay attention to
use the scale under consideration of your country specific unit of weight.
Tare-func tion:
Use the ON/OFF-panel to set the scale to "0". Place for example a bowl on the weighing
platform. Upon the weight is indicated touch the ON/OFF-panel to set the indication again
to zero. This process is repeatable until the max. capacity of the scale (5 kg) has been
reached. After removal of the load, the total weight will be indicating.
Automatic switch-off the sca le
If the indicated weight does not change within approx. two minutes, the scale will
automatically switch-off.

3. Error Messages

"Lo"
=
Battery is used up - Please replace the battery with the
intended type (1 x CR2032).
"Err"
=
Overload - The weight exceeds the maximum capacity of 5 kg.
Please immediately remove the critical load to avoid load cell
damage.

4. Technical Data

Capacity x graduation:
Max. 5 kg x 1 g
Dimensions:
Ø 200 mm x 14.5 mm
Battery:
1 x CR2032 (included)
Subject to technical modifications

5. Warranty

ADE warrants for a period of 3 years from the date of purchase that it will remedy any
defects due to faulty material or workmanship free of charge by repair or replacement.
When purchasing, please have the warranty coupon signed and stamped by the dealer.
When making a guarantee claim, please return the scale together with the guarantee card
including the reason of complaint to your dealer.
3

Publicidad

loading

Este manual también es adecuado para:

Ke 916