UFESA GK6700 Manual De Instrucciones página 17

4. Once it has been released, slide it out, in the direction of the head, until lit has been fully released.
5. Remove the four screws that join the two halves of the product.
6. Open the product by separating the two halves of the casing.
7. Remove the PCB set with the battery and cut the wires that connect the assembly to the engine and
to the input connector of the adapter.
8. Finally, cut the two metal sheets connecting the battery to the PCB or unweld it, whichever is easier.
The battery must be disposed of according to the appropriate safety standards.
1
5
We hope that you will be satisfied with this product.
2 3
6 7
4
8
17