Energy 19532-000 Manual De Usario página 5

Luz en carril decorativa de 6 cabezales
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. On the power feed stem (B) and support stems (F),
unthread the decorative collar (D) until it disengages from
the threads and slides freely on the shaft. Unthread and
remove the decorative end cap (E) from power feed stem (B)
and support stem (F). One side of the connector will swing
open exposing the track contacts.
5. Ensure ground side of track rail (G) (exposed copper
wire on top of the track rail) is facing the ceiling. In wall
applications, the copper ground should face the wall with
the contact channels (inserts with internal copper wire)
facing the ceiling. Note: The item should only be
assembled when grounds are correctly aligned.
Insert the track rail (G) into the connector on the power
feed stem (B) and support stems (F).
6. Close connectors on power feed system (B) and support
stems (F) tightly and re-attach the decorative collars (D)
and the decorative end caps (E).
CAUTION: Never slide the track rail (G) within the power
feed stem (B) or support stem (F) as it will scratch the track's
finish.
7. Unthread the decorative collar (D) on the track head
assembly (H) until it disengages from the threads and slides
freely on the shaft.
Unthread and remove the decorative end
cap (E) on the top of the connector. One side of the
connector will swing open exposing the track contacts.
4
B
5
Ground
Groove
Identation
6
B
7
5
D
E
B
F
G
G
D
G
E
E
H
F
F
D

Publicidad

Tabla de contenido
loading

Tabla de contenido