cleaning and maintenance
WARNING: The appliance must be unplugged from
the power point before cleaning or dismantling the
guards.
You can remove the front and rear guard to access the blades to clean them. Refer to the
•
"Assembly instructions" section.
Remove dust with a soft, dry cloth.
•
For a more thorough cleaning, you can clean the blades and body of the appliance with a
•
soft sponge slightly moistened with water and a mild detergent (such as washing-up liquid).
Rinse with clean water and wipe thoroughly with a soft, dry cloth.
Make sure that water cannot come into contact with the motor.
•
Do not plug the unit back in until it is completely dry.
•
Do not clean with scouring pads or abrasive detergents to avoid damaging the chromed
•
metal coating.
V.1.0
cleaning and maintenance
17