Final Assembly Instructions - Allen + Roth LP8075LBN Manual Del Usuario

WIRING INSTRUCTIONS
5. After connections have been made, turn leads
upward and carefully push power supply wire
leads into the outlet box, with the white and
green leads to one side of the box and the
black leads toward the other side.

FINAL ASSEMBLY INSTRUCTIONS

1. Remove one of the two preassembled
shoulder screws in the hanger bracket (B) by
phillips screwdriver (BB). Loosen the second
shoulder screw without fully removing it.
Rotate ceiling canopy (D) so second shoulder
screw moves into the small opening of the
keyslot. Tighten shoulder screw. Re-install the
previously removed shoulder screw to fully
assemble ceiling canopy (D) to hanger bracket
(B).
Phillips
BB
Screwdriver
WARNING
To avoid possible fire or shock, make sure the
electrical wires are completely inside the canopy
housing and not pinched between the housing
and the ceiling.
2. Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twist-lock feature.
x 1
13
5
1
2
E
Lowes.com/allenandroth
all
D
D
BB