ENGLISH
WOOD SURFACES
Too long or too strong an application of steam may
loosen wax, furniture polish or dye from wood sur-
faces (eg furniture, doors, etc.). On such surfaces give
only a short gentle application from a distance or play
the steam into a cloth and then wipe surface with the
cloth.
FABRICS
Before cleaning fabrics, always test first on a non-visi-
ble area.
Apply steam in the non-visible area and leave to dry
before inspecting for colour-change or texture-change.
120° NOZZLE WITH REMOVABLE CIRCULAR BRUSH
Use this tool to clean hard to reach corners, grooves and crannies (eg sani-
taryware and piping, radiators, etc.) as well as resistant dirt deposits like
grease and fat. The fine steam particles also release dirt deposits in ovens
freezers and fridges as well as bathroom and toilet fittings. You clean and
disinfect in one without chemicals.
GLASS SURFACES
Excessive temperature variations on a piece of glass
can cause it to crack, especially where outside air
temperature is exceptionally low. The whole glass
surface should first be pre-warmed with the steam
gun from a distance, so as to raise the temperature
gradually and avoid tension in the glass.
WINDOW SQUEEGEE
Affix the small or large blade (deep side of blade downwards) according to
the area to be cleaned. If necessary, add extension tube(s). Hold the steam
jets on the tool up to the glass, then switch on the steam, and pull the squee-
gee blade down the glass surface. Heavily-soiled glass surfaces can be pre-
prepared with the cloth-covered brushes.
GENERAL HINTS
The Polti-patented safety cap prevents the unit being opened
whilst any pressure remains in the system.