Safety Precautions; Determining Your Phone's Compatibility; Connecting To A Cordless Phone; Charging Your Aura Mobile Bt - Spracht AURA MOBILE BT Guia Del Usuario

Precautions

Safety Precautions

• The safest way to make or receive a call is to pull off to
the side of the road before communicating. Please
obey all cell phone and driving laws in your area.
•Do not use the Aura Mobile BT™ near water,
such as a sink or bath tub, or in a wet area.
•Do not use the Aura Mobile BT™ during an electrical
storm or near a gas leak or vapors that could
be ignited.
Determining Phone Compatibility
To determine if your mobile phone has Bluetooth®
capability, please visit your phone manufacturer's
web site.

Connecting to a Cordless Phone

To connect to a cordless phone, see diagram below and
refer to Quickstart guide (English only) for instructions.
DC Line E. Mic
4
Headset Jack

1. Charging your Aura Mobile BT™

Your Aura Mobile BT™ must be fully charged before you
use it for the first time. First, plug the power adapter into
an electrical outlet (do not exceed the voltage rating of the
power adapter). Next, plug the power adapter wire into the
port on the Aura Mobile BT™ labeled "DC".
Once the Aura Mobile BT™ is fully charged the "Charge"
indicator will turn off and the Aura Mobile BT™ is ready for use.
DC Line E. Mic

2. Powering On/Off

•Powering On: Press and hold down the Power button
�. A tone will sound. At this point the � button can be
released. The "Status" indicator will flash green every
few seconds to indicate your Aura Mobile BT™ is on.
•Powering Off: Press and hold down the � button. The
"Status" indicator will flash twice and a tone will sound. At
this point the � button can be released. All LEDs will turn
off to indicate your Aura Mobile BT™ is off.
User Guide
Power adapter
5