B Side Panel Position - ubabub Nifty Instrucciones

B
Side panel position
Step 1 select a side Panel.
Step 2 side Panel will slide snugly onto the Connecting & support Pins.
Step 3 Insert locking Cams on both side panels. (see Fig. 03).
Step 4 align the locking Cams and connecting pins. Insert the connecting pins
to the side panels. Make sure connecting pins are passing through the
locking Cams. Insert the locking Cam nuts. Use screwdriver to turn
locking Cam nuts clockwise until tight. (see Fig. 03).
Step 5 repeat steps 3 & 4 for other side Panel.
Step 6 Insert 8 bolts into lower rail, attach rail into side Panel (see Fig. 04).
(Turn clockwise using allen Key I until tight).
Fig. 03
3.1
Insert the
connecting pins
to the rails.
Fig. 04
8 x
55mm
bolt
3.2
Insert the
locking Cam
nut.
x 4
3.3
Use screwdriver to turn locking
Cam nuts clockwise until tight.
11