Braun PrecisionSensor BP 2550 Manual Del Usuario página 9

Holding down the memory button for more than a
second will take you from memory «a» to «b» or back.
Turning off the product
Press the I/0 button to turn the product off.
Otherwise the product will turn off automatically after
2 minutes.
Pre-settings
You can adjust some of the settings of your blood
pressure monitor. You probably will not wish to
change settings often. Therefore the necessary
select button (D) is placed underneath the battery
compartment cover.
First turn off the product. Keep the select button
beep
pressed, until an acoustic signal sounds. The display
shows an image of all modes: time/date, position
sensor, statistics mode (see below).
If you have made changes and wish to save them,
press the memory button. If you want the pre-
settings to remain unchanged, keep pressing the
select button until the display goes out, or simply
wait 2 minutes.
Setting the time
Repeatedly press the select button briefly until the
hour in the time/date line is flashing. With the I/0
button you can change the hour. Briefly pressing the
select button takes you to minute, day or month,
which you can each change with the I/0 button.
9