Features; Status Indicator; Troubleshooting - Ford 48A Single Phase Manual De Operación

1. Unlock and remove the coupler from the vehicle press-
ing the coupler button (typical in North America) or
follow the vehicle direction to disengage the vehicle
lock on the coupler (typical in Europe). The charge
station should return to Power On state
( ).
2. Close the vehicle charge port cover.
3. Wrap the loose cable around the remote dock.
4. Plug the coupler into the remote dock.
5. Lock ( ) the charge station if desired.
5.3

Features

Features available (see the FordPass app for functions and
uses)
– Access Control (lock/unlock)
– Charging Insights
– Maximum Charge Current Setting
– Station Sharing
This product will continue to evolve and new features will be
released over time.
l The charge station is capable of over-the-air firmware
updates when connected to the Internet through Wi-Fi.
l The charge station does not require Wi-Fi to charge your
vehicle, but Wi-Fi does enhances its capabilities.
5.4

Status indicator

State Sta- Description
tus in-
dica-
tor
Unpowered Off
Power On Blue, center sin-
gle LED, solid
Standby Blue, full bar,
solid
8
State
Charging
Locked
Plugging In
Setup Mode
Update
/Rebooting
Explanation
Pairing Mode
The charge station
is not powered.
The charge station
Self-Check
is powered and un-
Mode
locked (default
state).
The charge station
Charging Re-
is powered and
duced (Over-
ready to be
heating)
charged, but the
Sta- Description Explanation
tus in-
dica-
tor
charger is not
charging the vehi-
cle.
Blue, full bar, The charge station
pulsing is successfully
charging the vehi-
cle.
Blue, center sin- The charge station
gle LED, inter- is powered and is
mittent locked and will not
charge until un-
locked.
White, full bar, The charge station
cycling to middle is connecting to the
vehicle, preparing to
charge.
White, full bar, The charge station
pulsing is in setup mode for
managing settings
such as Wi-Fi.
White, wipe left The charge station
to right is downloading
firmware or reboot-
ing after changes to
settings.
White, full bar, The charge station
cycling to mid- is connecting to a
dle phone for setup and
changes to settings.
White, full bar, The charge station
solid is checking that all
status indicators
are working.
Amber, full bar, The charge station
solid back- is charging at a re-
ground. Blue, duced rate due to
center, pulsing overheating.
SKML9J-10C823-AA
State Sta- Description
tus in-
dica-
tor
Station Error Amber, full bar,
State solid
Station fault Red, full bar,
solid
Station elec- Red, full bar,
trical fault blink
Table 1: Status indicator
5.5

Troubleshooting

HMI state Recommended actions
Unpowered Make sure that the circuit is operational and
that the circuit breaker is switched on. If the
problem persists, please contact Ford Cus-
tomer Service.
Not Charging 1. Make sure that the station is not in a
locked state.
2. Make sure that the station has its power
switched on.
3. Make sure that the vehicle coupler is
properly inserted into the vehicle.
4. Verify and adjust your vehicle charge
scheduling or time preferences.
5. Verify that the vehicle is not fully
charged already.
Unexpected 1. Make sure that the vehicle coupler is
standby properly inserted into the vehicle.
2. Verify and adjust your vehicle charge
scheduling or time preferences.
Ford Connected Charge Station Operation manual
Explanation
The charge station
has a fault and re-
quires trouble-
shooting. See the
app for details.
The charge station
has experienced a
non-recoverable
fault.
The charge station
has experienced a
ground fault.