• Do not remove the rating plate.
• This appliance may be used by children aged 8 years and over and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge provided that
they are under close supervision or have been given instruction regarding the use of the
appliance in a safe way and understand the hazards involved. Children must not play with
the appliance. Cleaning and user maintenance must not be carried out by children without
supervision.
• Never leave the blender unattended.
• Unplug before fitting or removing parts, after use, before cleaning, before leaving the room,
or when the blender malfunctions. Do not pull on the power cord to unplug.
• Never let the motor unit, cord or plug get wet. Do not immerse the motor unit, cord or plug
in water or other liquids; do not rinse under running water.
• Clean the blender and its components before using it for the first time. Observe the information
in the section entitled "cleaning".
• Dry off the blender and all of its parts before fitting components and before connecting the
unit to the power supply.
• Always operate the appliance on a stable, flat, clean and dry surface.
• Do not glue foreign objects onto the appliance.
• Keep hands and utensils, out of the pitcher when it is on the motor unit.
• Never use attachments that are not intended for this blender.
• It is only possible to turn on the appliance when the plug is connected to an electric socket.
• Compare the connection information (voltage and frequency) on the rating plate with that
of your electrical network. The only way to disconnect the appliance from the power supply
is by pulling the plug from the socket.
• Set up the appliance so that the power plug is always accessible.
• Before removing the pitcher or mini-mixer from the motor unit, wait until the blades have
completely stopped.
• Ensure the blender' s lid is in place before putting it into operation.
• The packing material should not be used as a toy, it is a suffocation hazard!
• When cleaning the blade assembly, you must be especially careful to avoid injury because
the blades are extremely sharp.
• Touching live lines and parts under voltage poses a lethal risk of electrocution.
• Avoid damaging the power cord. Do not crush it, twist it, or pull it over sharp edges. Keep it
away from hot surfaces or open fire.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Do not use any tools or objects inside the appliance. Metal objects can generate an electrical
short or cause an electric shock.
• Never try to put the blade attachment into the appliance and turn it on without the pitcher
being present. An open blade can result in serious injury or cause damage to the appliance!
Manual FitMix Smart_20170309_BA.indd 8
8
09.03.17 11:48