Charging The Device - UFESA CP6550 Manual De Instrucciones

Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the
brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects,
for the non-observance of these warnings.

CHARGING THE DEVICE

Before using your hair clipper for the first time, charge for 10-12 hours, and charge 8 hours regularly.
Ensure the product is switched off.First insert the plug on the end of the mains adaptor lead into the unit(
fig. 1) and then connect the mains adapter to the mains supply (100~240V, fig. 2) The charging indicator
will light up in red, and the light will turns green after fully charged.
If the batteries discharge fully, recharge 2 or 3 minutes later, then switch on for mains operation.. Or
connect the adaptor to the charging base, then put the unit into the charging base for charging.
fig. 1 fig. 2
Your hair clipper cannot be overcharged. However, if the product is not going to be used for an extended
period time (2-3 months), unplug it from the mains and store. Fully recharge your hair clipper when you
like to use it again.
To preserve the life of your batteries, let them run out every six months then recharge for 10-12 hours
again.
INSTRUCTIONS FOR USE
Prior to turning the device on, select the desired comb guide (F or G) fitting it by picking it up by the sides
and inserting the parts that stick out into the guide (fig 4) The desired length must be positioned using
the trimming adjustment wheel (H) switching the on switch upwards (B), in order to ensure that it remains
secure, ensuring that the comb is secure and ready for use. If you want to change the length, move the
switch downwards (B), and reselect the desired length with the trimming adjustment wheel (H) and when
you turn on the on switch again, the comb is secured.
15