Publicidad
Install the Fixture
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
2
3
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Install the fixture base to the post, then place the fixture onto the base and secure them to the post with post screws.
4
5
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Install the top cover and secure it in place with the washers and cap nuts.
6
6
TOP COVER
FIXTURE
BLACK WIRE
4
FIXTURE BASE
HOT WIRE
POST
6
5
4
2
CAP NUT
WASHER
LAMP
WHITE WIRE
POST SCREW
NEUTRAL WIRE
Publicidad
