Human Touch GRAVIS ZG CHAIR Manual De Instrucciones página 2

2
REMOVE UPPER BODY PAD
1. If the backrest is not already in the upright position, use the remote Back
2. Open the backrest panel zipper.
3. Open the inner zipper, then slide the top of the body
pad up and over the headrest to detach it from the chair.
4. Flip the backrest portion of the pad forward onto the legrest
far enough to expose the canvas pocket.
2
button to raise it.
Backrest panel zipper
Body pad
Open the inner zipper
Canvas pocket
3
DISCONNECT THE HOSES AND CABLES
1. Open the canvas pocket, then disconnect the air hoses bank and the two cable connectors.
HINT: To disconnect the air hoses, use one hand to push inward on the tab on each side of the hose bank while
using a flat-head screwdriver to pry the two sides of the hose connector apart.
Canvas pocket
2. Thread the air hoses and cables through the hole in the chair canvas to free them from the chair.
4
REMOVE THE BODY PAD FROM THE CHAIR
Detach the hook-and-loop fasteners on the underside of the legrest portion of the pad to detach the
pad from the chair, then remove the pad.
Pad
Legrest
Backrest
Air hose connector
Connectors
3