Product Description And Specifications - Bosch PMF 220 CE Manual Original

16 | English
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Keep the magnet away from implants and
other medical devices, e.g. pacemakers or
insulin pumps. The magnet generates a field
that can impair the function of implants and
medical devices.
Keep the power tool away from magnetic data carriers
u
and magnetically sensitive equipment. The effect of
the magnet can lead to irreversible data loss.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. nails, clamps). It is also suit-
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Orbital stroke rate preselection thumbwheel
(3) Ventilation slots
(4) Handle (insulated gripping surface)
(5) Thread for auxiliary handle
(6) Tool holder
(7) Magnet
a)
(8) Plunge cut saw blade
(9) Clamping bolt
(10) Hex key
a)
(11) Sanding plate
a)
(12) Sanding sheet
a)
(13) Depth stop
a)
(14) Segment saw blade
(15) Clamping lever for dust extraction system
a)
(16) Dust extraction outlet
a)
(17) Dust extraction system
1 609 92A 674 | (01.12.2020)
(18) Dust extraction hose
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Multifunction tool
Article number
Orbital stroke rate preselec-
tion
Constant electronic control
Soft start
Rated power input
Power output
No-load speed n
Oscillation angle on left/
right
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑4.
Typically, the A-weighted noise level of the power tool is:
84 dB(A); sound power level 95 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Working without the Auxiliary Handle
Vibration total values a
determined according to EN 62841‑2‑4 (Sanding),
EN 62841‑2‑11 (Cutting):
Sanding: a =10 m/s
h
Cutting with plunge cut saw blade: a
Cutting with segmential saw blade: a
Scraping: a =12 m/s
h
Working with the auxiliary handle
Vibration total values a
determined according to EN 62841‑2‑4 (Sanding),
EN 62841‑2‑11 (Cutting):
Sanding: a =9 m/s
h
Cutting with plunge cut saw blade: a
Cutting with segmential saw blade: a
Scraping: a =16 m/s
h
The vibration level and noise emission value given in these
a)
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
a)
PMF 220 CE
PMF 2000 CE
3 603 A02 0..
W
W
−1
min 15000–20000
0
°
kg
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2
=16 m/s , K=2 m/s
h
2
=14 m/s , K=3 m/s
h
2 2
, K=1.5 m/s .
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2
=17 m/s , K=2 m/s
h
2
=18.5 m/s , K=3 m/s
h
2 2
, K=1.5 m/s .
Bosch Power Tools
●
●
●
220
130
1.4
1.1
/ II
2
,
2
,
2
,
2
,