Hardware Installation - IOGear GKM552RB Guia De Inicio Rapido

Hardware Installation

Keyboard Battery Installation
1. Open the battery cover on the back of the keyboard
2. Insert two of the included AAA batteries
3. Close the battery cover
Mouse Battery Installation
1. Open the battery cover on the bottom of the mouse
2. Insert the included AA battery
3. Close the battery cover
USB Receiver Installation
USB receiver is located underneath the mouse within battery cover
1. Plug the USB receiver into an available USB port on your computer
2. Your Operating System will start to install the device driver
automatically
3. No additional software is needed. Enjoy your new keyboard and
mouse!
Keyboard and Mouse Re-Pair process
1. Insert USB receiver into your computer. Wait until computer
recognizes the receiver.
2. Make sure batteries are inserted to keyboard (2 AAA) and mouse
(1 AA). Bring both keyboard and mouse within 18 inches of USB
receiver.
3. Press "ESC" key and "K" key together. Keyboard will auto connect
with receiver.
4. Within 30 seconds of step 3, press the mouse middle button and
right button together. Mouse will pair.
3