King of Fans MAXI-HEAT CH940 Manual De Usario página 5

Maintenance
1. Always turn OFF the heater and
disconnect the cord from the
electrical outlet before cleaning
your heater.
2. Light accumulated dust may be
removed from the heater with a
soft cloth or vacuum cleaner.
3. Wipe the exterior surfaces of the
heater occasionally with a damp
cloth (not dripping wet), using a
solution of mild detergent and
water. Dry the case thoroughly
before operating the heater.
Caution: Do not allow water to run
into the interior of the heater
as this could create a fire or
electric shock hazard.
4. The fan motor is factory lubricated
for life and will require no further
lubrication.
5.
Store heater in a clean dry place
when not in use.
Warning:
Any other servicing
needed must be performed by an
authorized service representative. Do
not attempt to service the unit
yourself.
Avoid the use of an extension cord
because the extension cord may
overheat and cause a risk of fire. If
this heater is used with an extension
cord, the cord should be 14 AWG
minimum size and rated no less than
1875 watts.
Product Specifications
Model#: CH940
Voltage: 120V, 60Hz
Current: Maximum continuous
draw: 12.5 amps;
Minimum draw: 0.2 amps
(fan only).
Output: 5200 BTUs
Power: High: 1500 Watts
Low: 900 Watts
Turbo Fan: Multi blade; Low
Noise