Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.
e.
Repeat this process for the other swivel
bracket
3. Assemble the back corners, to the right are
the components you will need:
a.
Install the back wheel using the M6-45 axle
bolt, nylon wheel bushing, and M6 lock nut.
4. Carefully measure the footprint of your machine (or
whatever you are mobilizing) and add about 1" to the
dimension. (1" allows clearance for the fasteners).
5. Review the assembly examples shown below to help
you determine the fixed wheel, caster and leveler
placement. As these are examples only, you must
determine what best suits your particular machine's
requirements for stability.
Tighten all hardware securely
Assembly Examples
Be sure to follow Safety and Assembly Instructions. Keep in mind the actual
operation of your machine and the effect it has on overall stability.
Direction of Roll
A long, narrow
base, such as on
a jointer, would
benefit from this
arrangement. Most
machines may be
arranged to the
convenience of
the user.
5
2 e.
3
3 a.
Direction of Roll
A short, narrow
base, such as found
on a drill press
or bandsaw, may
benefit from this
arrangement. Due to
swivel rotation, base
may sit out of level.
Rotate swivel wheel
away from base to
correct.
Publicidad
Tabla de contenido
