Open the drain switch, water
flow
into
drainpipe from this end
Water flow into drip tray from this
end
1. Open the drain switch to release the water from the cavity into the drip
tray. Ensure the drip tray fit into the notch to avoid water overflow. The
drip tray can load 450mL water.
2. After all the water drain out, close the drain switch and put 800mL fresh
water into the cavity.
the
S
shape
Figure 15(Sketch map of drain construction)
Move the drain switch
to horizontal line, will
start to drain water
EN-13
Drip tray