Honeywell F-HE Manual Del Usuario página 9

SOCKET FOR POWER TOOLS (OPTIONAL)
The wet-dry vacuum cleaner can be used as a dust extraction system when working together with power
tools.
Before connecting the power tool make sure that the load/amperage of the power tool does not exceeds the
max load/amperage stated on the name plate.
1. Connect the power tool cord to the socket of the
cleaner (A). Connect the power tool adaptor to the
dust exhaust of the power tool and to the suction
hose. Turn on the vacuum cleaner to position II (B).
Turn on the power tool and the cleaner will
automatically start together with the power tool.
2. The vacuum cleaner will stop with a delay in order to
empty the hose from dust.
BLOWING/INFLATING (OPTIONAL)
To convert from vacuuming to blowing, turn switch off (0). Remove the
hose from the suction inlet, Figure 1, (5), and insert it into the blower
outlet, Figure 1 (4). Turn switch on
An optional blower/inflator kit may be included. This will increase the
performance of the blower and allow for inflating some small toys. Insert
large inflator tool in the end of the hose. Use outlet from this tool to
inflate or attach other tools to it as needed.
DUST BAG (OPTIONAL)
For dust free disposal a dust bag can be used. Take off the head. Push the dust bag over the suction inlet
from the inside. Disposable dust bags can be purchased
on our website, www.producteersusa.com
9
or by calling 866-814-4103.
FIG. 11
FIG. 13
FIG. 12