Descargar Imprimir esta página

Satco NUVO 65-655 Instrucciones De Instalación Y Seguridad página 2

Publicidad

INSTALLATION: Wall Mount –
STEP 4: Make mounting holes on
the wall according to the size shown
in the picture. Use an electric drill to
drill through the mounting holes on
the fixture.
STEP 7: Run the power line through
the hole.
STEP 10: Attach the fixture lens
to the fixture.
Continued
STEP 5: Remove the 1/2 plug
with a screwdriver.
STEP 8: Screw the fixture onto
the mounting holes.
STEP 11: Fasten the fixture
lens to the fixture body. Replace
rubber sleeves on screws.
2
STEP 6: Attach the EVA pad to
the correct position on the back
of the fixture.
STEP 9: Connect the wires, refer
to the Wiring Diagram. Disconnect
the photocell wire if function is
not needed.
STEP 12: Installation is
complete. Turn power ON.

Publicidad

loading

Este manual también es adecuado para:

Nuvo 65-656