Publicidad
1.
2.2
F
2.1
A
Switch ON
Switch OFF
IMPORTANT SAFETY INSTRUCTIONS:
1. Read all instructions completely before beginning installation. Keep these
instructions in a safe place for future reference.
2. To reduce risk of fire and over-heating, make sure all connections are tight.
3. Connect this product only to a 120V 60 Hz electrical supply.
3. Before installing, disconnect energy.
Warning!
Disconnect power supply before installation and change the bulb only when cold.
Atención!
Desconectar la conexión a red antes de ser manipulada y realizar el cambio de
bombilla sólo cuando ésta se haya enfriado.
Caution: Use silicone spray for maintenance of the swivel joint.
Atención: Para el mantenimiento de la rótula, utilizar silicona en espray.
1. Connect the wiring in the outlet box., passing the power cable through the hole.
2. Attach the cover (A) by means of the small screws (B).
1. Realizar las conexiones eléctricas en la caja de empalmes, pasando los cables de
red por el orificio.
2. Colocar la tapa (A) mediante los tornillos suministrados (B).
IMPORTANT! / IMPORTANTE!
Publicidad
