Door Board Overview - LiftMaster myQ Business CAPXL Manual De Instalación

INTRODUCTION

Door Board Overview

The CAPXL / CAPXLV has a combination of access control inputs/outputs on the Door Boards that work in conjunction to
control up to 4 access points.
DOOR BOARD 1
Door 1
WIEGAND INPUT
REQUEST
TO EXIT
STATUS
PRIMARY
RELAY
AUXILIARY
RELAY
WIEGAND
OUTPUT
INPUT/OUTPUT
Wiegand Input
Request to Exit
Status
Primary Relay
Auxiliary Relay
Wiegand Output
*NOTE: Only the 26-bit weigand protocol is compatible in UL installations.
PRE-INSTALL
Door 2
WIEGAND INPUT
STATUS
REQUEST
TO EXIT
USED FOR
Proximity Readers, ASCII keypads, RFID readers transmitting 26-bit *30-bit, *32-bit Mifare, *and
*37 bit with or without facility code. (12 Vdc Power for readers only. Do not use to power external
devices)
External Free Exit Loop Detectors, Push Buttons, and Proximity Sensors
Door Sensors, Supervised Gate Operators, and EOL (End of Line) Wiring
Closed Door Sensor, Closed Gate Sensor, Supervised with EOL (End of Line) or unsupervised Gate
Operators, Door Strikes, and Maglocks
Gate Operator, Door Strikes, Alarm Shunt, Maglocks and Lights (for control only - power to be
provided by external supply
26 Bit Access Granted Activity for integration with third party systems
INSTALL
Door 3
REQUEST
TO EXIT
STATUS
PRIMARY
PRIMARY
RELAY
RELAY
AUXILIARY
AUXILIARY
RELAY
RELAY
NOT USED
6
NETWORK ACCESS CONTROL
DOOR BOARD 2
WIEGAND INPUT WIEGAND INPUT
Door 4
STATUS
REQUEST
TO EXIT
PRIMARY
RELAY
AUXILIARY
RELAY