Mychanic 52813 Instrucciones De Operación página 3

• Do not attempt to alter or change the LED bulbs as this will void the limited warranty.
• Do not attempt to change the batteries as this will void the limited warranty.
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the light and any accessories from packaging. Make sure the light, charger
and cable are included.
• Inspect the light carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily
operated the light.
INSTRUCTIONS FOR USE
Please check light for damage or cracks before using as this can cause the product to fail or injure the user.
Charge the battery completely before using for the first time.
The Blade Light has 4 modes:
• White SMT LED White High Mode
• White SMT LED White Low Mode
• Red SMT LED Red Flashing
• Red SMT LED Red Strobe
To switch work light to white low, press button once.
To switch work light to white high, press button again (twice total).
To switch red flashing, press button again (three times total).
To switch red strobe, press button again (four times total).
To switch work light OFF, press button again (five times total).
Ensure light is securely attached with magnet before working under unit to prevent injury or damage.
Hook is designed only to support the weight of the work light. Do not attempt to hang other articles using
this product.
Ensure light is securely attached with hook or magnet before working under unit to prevent injury or
damage.
Lighting angle can be 360° adjusted by rotating the light blade.
Top metal hook has "push eject" function.
MAINTENANCE
WARNING Procedures not specifically explained in the manual must be performed only by a qualified
technician.