Preparation; Operating Instructions - Kobalt KAG 424B-03 Manual De Instrucciones

PREPARATION

Know Your Angle Grinder/Cut-off Tool
Before attempting to use the tool, familiarize yourself with all of its operating features and
safety requirements. Helpful tools (not included): Phillips screwdriver, flathead screwdriver.
WARNING
• This product is only designed for grinding and cutting-off. Use for any other purpose is not
recommended and may result in serious injury.
• Do not allow familiarity with the tool to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possibly serious personal injury.

OPERATING INSTRUCTIONS

1. To Attach Battery Pack
a. Ensure that the paddle switch (E) is in the OFF
position.
b. Align the raised portion on the battery pack
with the grooves on the bottom of the tool, then
slide the battery pack onto the tool as shown.
c. Make sure that the latches on the battery pack
snap into place and the battery pack is secured
to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper attachment of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Ensure that the paddle switch (E) is in the
OFF position.
b. Press the battery-release button to release the
battery pack.
c. Pull forward on the battery pack to remove it
from the tool.
WARNING
• To reduce the risk of injury, always remove the
battery pack before making any adjustments or
changing accessories.
1a
1b
10
E