HoMedics Seville Manual De Instrucciones E Información De Garantía página 3

Components
Carefully remove all contents from packaging and inspect the product to make sure
all components of the chair and ottoman have been received.
These should include:
• Chair seat frame and legs A
• Chair back frame with incorporated
massage mechanism B
• Chair cushion C
• Small bolts for chair and ottoman (8) D
• Large bolts for chair seat (2) E
• Allen wrench F
• AC Adapter G
• Ottoman legs H
• Ottoman top frame I
• Ottoman cushion J
See Figure 1.
Figure 1
H
J
D
E
F
G
I
C
A
4
Easy to Follow Guide to
Chair and Ottoman
Assembly
1.Assemble Chair Base
• Unfold the chair seat and legs A as
shown in Figure 2.
• Secure with the large bolts E in
locations 5 and 6 using the allen
wrench F .
See Figure 2.
TIPS: Do not fully tighten the first bolt
until you have lined up and partially
tightened both bolts..
Assembly will be easier if you turn the
base on its side.
2.Attach Chair Back
• Slide the chair back B into the open
ends of the seat frame A as shown in
Figure 3.
• Secure with 4 small bolts D in
locations 7, 8, 9 and 10 using the
allen wrench F . See Figure 3.
TIPS: Do not fully tighten any bolt until
you have lined up and partially tightened
all 4 bolts.
Make sure the chair back is fully upright
when you are tightening the bolts. It
may help to support the chair back
B
with either your hand or your body.
• Make sure all bolts are fully tightened.
This includes the bolts that were already
inserted in the frame.
• Attach the chair cushion C as shown
in Figure 4. For proper fit, line up the
recess in the cushion with the massage
mechanism in the chair back.
Also, make sure the adhesive strips
are lined up.
Figure 2
5
6
A
Figure 3
7 B
9
A
8
10
Figure 4
C
A
5
B