Operation And Configuration; Operating And Indication Elements; Configuration - Phoenix Contact EMpro EEM-MA400 Instrucciones De Montaje Para El Instalador Eléctrico

English
5

Operation and configuration

5.1

Operating and indication elements

2
3
4
1
Figure 10 Operating and indication elements
1. Pushbuttons with dual functionality:
Normal mode: Display measured values
Programming mode: Change configuration
2. Backlit LCD
3. Display for measured values in relevant conductor
4. Measured value
5. Unit
6. Display for recording the real energy (flashes for every kWh)
7. Display for active communication (if optional communication module is installed)
5.2

Configuration

Once the device has been installed and connected, it can be configured.
U
Figure 11 Switching to configuration mode
Button Description
PROG Opening configuration mode (press and hold for 3 seconds)
▲ Selection of the next menu item
▶ Opening edit mode
▶ In edit mode: Selection of the parameters/values to be changed
▲ In edit mode: Changing parameters/values
OK Confirm setting
To exit configuration mode, hold down the "PROG" button for 3 seconds.
8 PHOENIX CONTACT
1 x
3 seconds
7
6
5
104512_en_02