Using The Product - Rowenta JB10 Serie Instrucciones De Uso

Caution! Keep your children safe: do not leave any parts of the packaging
readily accessible (i.e. plastic bags, cardboard boxes, polystyrene inserts, etc.)!
Choking/asphyxiation hazard!

USING THE PRODUCT

Install or Change the batteries
1. Slide the battery compartment lid down
2. Remove the spent batteries (if any).
3. Insert new batteries in the good polarized
positions. (2 x AA (LR6) 1.5V
4. Slide the lid partially on the compartment.
5. Gently press with your thumb on the spot
shown with the arrows on the battery
compartment lid and slide the lid until it
engages with an audible snap.
Instructions for use
1. Slide the On/Off switch up to On.
2. Spread the clothing out on a flat surface, smooth all wrinkles, and
shave by moving the lint remover across the fabric surface.
3. Turn off the appliance by sliding the On/Off switch to Off.
4. Use the height adaptor to adjust the height of shaving. Turn the
height adaptor to adjust height.
5. Never over-pressed on grid of metal blade garde while using, use soft
circular movements.
Hints and tips
• To guarantee optimal operation, using when garment is worn is not
recommended. Operation best efficiency will be obtained on a flat
surface. Using when garment is worn may cause injuries.
• Use only on wet clean surfaces.
• Never use the lint remover on areas of woolen or fiber clothes where a
fiber would be pointing out. Never use on a creased garment.
• Be careful when shaving the following parts of clothing:
– near buttons and zippers
– near any protruding parts
– joints
– stitches
– non-flat surfaces
– fragile parts
8
).