Care And Cleaning - Black and Decker PS2000 Manual Del Usuario

CH O PP I NG & B L E ND I NG
1. Place food to be chopped or blended into the bowl around the blade.
Note: You may need to cut some ingredients into smaller pieces to fit in
the bowl.
2. Assemble the chopper top onto the bowl as described in previous
assembly instructions.
3. Plug the cord into a standard outlet
4. Rest your hand comfortably over the
chopper top so that your fingers extend
over the pulse HIGH/LOW button area.
You may also rest your hand on top with
fingers pointing back and use your thumb
to control the pulse buttons. (E)
5. Press and release pulse buttons to begin
chopping. One (1) Dot indicates Low Speed and two (2) Dots indicates
High Speed.
Note: Avoid running the motor continuously for more than 1 minute.
Note: For tougher items such as cheese, do not run the motor
continuously for more than 15 seconds.
6. Operation will stop when you release the pulse button. Be sure the
blade stops spinning before removing the chopper top. Unplug the unit.
Carefully remove the blade before transferring food into a serving dish.
Use the handle and pour spout to serve liquid foods.
Important: Blade is removable. Do not pour out contents without
removing the blade first.
CA R E A N D CLEA N IN G
This product contains no user serviceable parts.
1. Wash the bowls, lids, and blade in soapy
water after use. These parts are dishwasher safe,
recommended top rack only.
2. Remove the detachable splash guard from
the bottom of the chopper top. (F and G) Wash
splash guard in soapy water or in the dishwasher.
3. Wipe the chopper top with a damp cloth
or sponge. Do not immerse chopper top
in water.
4. Blade is extremely sharp. Handle very
carefully and store it in the plastic bowl.
4
E
Press button to operate.
F
Grasp splash guard rim.
G
Pull downward to remove.