Installation Requirements - Wolf E Serie Guia De Instalacion

Specifications

Installation Requirements

Installation Requirements
The oven can be installed in a standard or flush inset
application. If a cooktop is installed above an oven, a
1
minimum of / " (6) is required between the units. The
4
location of the electrical supply within the oven opening
may require additional cabinet depth.
Base Support
Single Oven
Double Oven
Finish the edges of the opening. They may be visible
when the door is open.
For standard installations, the face trim overlaps stiles and
rails.
Trim Overlap
Top
Bottom
Sides
For flush inset installations, a minimum
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
|
4 English
Dual Installation
Two 30" single ovens can be installed side by side in a
standard or flush inset application. A dual installation kit is
required. To maintain appropriate airflow, the ovens must
be installed into one opening. Any cosmetic or structural
material placed between the ovens will impede airflow
and is not recommended. Refer to the illustrations on the
Min
following pages.
250 lb (115 kg)
The dual installation kit is available through an authorized
400 lb (181 kg)
Wolf dealer. For local dealer information, visit the locator
section of
Dimension
1" (25)
0"
11
/ " (18)
16
1
/ " (3) reveal is
8
our website subzero-wolf.com.