AKASO NEON 1 Manual Del Usuario página 4

3. Connecting fitness tracker to APP
When you first open the "H Band" APP , the APP will lead you to bind the
fitness tracker, or "Click to connect device" on the main interface of the
APP . search and find Bluetooth Signal "NEON1" After successfully
connecting the device model, "NEON1"will be shown under the list of
"My Device" in the APP . Also in the left top of the device the sign "
be present. Please reconnect if the sign "
4. Connection and Matching Notifications
① Make sure the phone Bluetooth is turned on.
② Make sure the device has a full battery and is turned on or charged
before using.
③ Make sure the device is within 50cm range while connecting with the
phone.
④ If Android phone can not find any device through APP , please check if
it allows "HBAND" to use Bluetooth in the phone permission settings.
Also maek sure turn on GPS tracker
⑤ Fitness tracker may disconnected to Android cellphone ,because the
APP is shut down by the system, please set the "battery saver" to
"No restrictions" and turn on the "autostart" so than it will allow app
to run. Take MI Mix 2 for example as below interface. Different
Andriord phone setting interface may be different. eg. SAMSUNG, the
reference path is Setting > General > Battery manage > Unmonitored
app - Add H Band; Autostart path: setting > Battery> Smart manage
> auto run APP > autostart.
3
" will
" is showing.
at phone setting.
4