Technical Specifications; Frequency Response; Polar Pattern - SE Gemini II Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21

Technical Specifications

Capsule

Polar pattern

Frequency range
Sensitivity
Attenuation pad
Max. SPL (0.5% THD)
Equivalent noise level
Dynamic range
Signal-to-noise ratio
Low cut filter
Electrical Impedance
Recommended load impedance
Connectivity
Dimensions
Weight

Frequency response

Support
In the event that you experience any problems or have any questions regarding your sE product, please
contact your dealer first for the fastest and most direct service. If authorized service is required, it will be
arranged by that dealer:
If you are still having difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
Lastly, please remember to register your new gear with sE to extend your warranty to a full three years:
http://www.seelectronics.com/registration
Handcrafted 1.4" true condenser capsule
Cardioid
20 – 20,000 Hz
40 mV/Pa (-28 dBV)
10 dB, switchable
135 / 145 dB
13 dB(A)
122 / 132 dB (0/10 dB Attenuation pad)
81 dB
150 Hz, 6 dB/Oct, switchable
200 Ohms
>1k Ohms
3-pin male XLR connector
Microphone
Remote Control Unit
Microphone
Remote Control Unit
http://www.seelectronics.com/dealers
(0/10 dB Attenuation pad)
SPL
Diameter 80 mm (3.15 in.) Length 220 mm (8.66 in.)
186 x 157 x 81 mm (7.32 x 6.18 x 3.19 in.)
1180 g (41.6 oz.)
1970 g (69.5 oz.)
Polar Pattern
4

Publicidad

Tabla de contenido
loading

Tabla de contenido