Phantom PHOTOBIO-MX Manual Del Usuario página 10

Step 6. Power connection
Connect the power cable harness with the driver AC connector as shown in Fig. 12.
AC Input power connector
Step 7. Dimming connection (Optional)
The Product is equipped with dimming connection supporting 0-10v dimming signal.
Use the provided dimming cable (Part E) to interface with the PHOTO·LOC 0-10V cable kit
(PTBCC8820W) and Autopilot PX2 advanced digital & analog lighting controller (APDPX2) to
centralize control of up to 80 PHOTOBIO fixtures.
10 www.phantombio.com
USER MANUAL
Dimming Connection
Fig. 12
Power cable harness